GRAPHTEC plotter blades

GIS Premium Blades

All Graphtec and ENCAD NovaCut cutting plotters.

Drag blade, tungsten carbide with cone (stainless steel) and spring GIS Ref. Org. Ref. Angles Description / application   Prices (€  VAT excluded)
α δ β 1 - 4 5+ 10+ 20+
Plotter blades Graphtec 45° MGRA.1045
CB09U 45 25 45 Ø = 0.90 mm, l = 19 mm.
Offset = 0.45 mm.
Vinyl letters general. Spring included.
27,60 25,39 23,18 22,08
Plotter blades Graphtec 55° MGRA.1055
55 25 35 Like MGRA.1045, modified geometry for thick / soft or tough material (Flock, textile, thin cardboard). Spring included. 27,60 25,39 23,18 22,08
Plotter blades Graphtec 45° MGRD.1045
45 30 60 Tungsten carbide blade with brass sleeve  (spring not included).
Ø = 1.50 / 2.50 mm, l = 20 mm
Offset = 0.45 mm
Vinyl letters in general.
27,60 25,39 23,18 22,08
Plotter blades Graphtec 60° MGRD.1060
- 60 30 30 Tungsten carbide knife with brass sleeve (spring not included). Dimensions like MGRD.1045.
Offset = 0.70 mm.
For thick / soft or tough material (Flock, textile, cardboard).
27,60 25,39 23,18 22,08
Spring for Graphtec exchange blades MGRA.0999
Spring for blades MGRD... 0,18 0,17 0,15 0,14
Blade holder for Graphtec blades diameter 0.90 mm MGRA.0500
- Blade holder for 0.90 mm blades MGRA... Blade fixation: Spring forces cone into rear bearing. 92,80 85,38 77,95 74,24
Blade holder for Graphtec blades diameter 1.50 mm MROL.0510
Knife holder for 1.50 mm blades MGRD... Blade fixation: Spring forces cone into rear bearing. 92,80 85,38 77,95 74,24
Exchange blades for GRAPHTEC plotter CRAFT ROBO GIS Ref. Org. Ref. Angles Description / application   Prices (€  VAT excluded)
α δ β 1 - 4 5+ 10+ 20+
Exchange blade for GRAPHTEC plotter Craft Robo 45° MGRC.1045 - 45 25 45 Ø = 0.90 mm, l = 17 mm.
Offset = 0.45 mm.
General purpose blade.
19,30 17,76 16,21 15,44
Blade holder GRAPHTEC Craft Robo MGRC.0500 -       Aluminum blade holder (new style).  For blades type MGRC. Height adjustment by POM cap at the front for precise alignment to the thickness of the film. 65,20 59,98 54,77 52,16
Caution: Blades MGRC...  fit ONLY into OUR blade holder MGRC.0500. Only this combination can be used with the Craft Robo plotter. According to our information Graphtec does not offer any replaceable exchange blades but a unit consisting of holder and blade that cannot be separated.
  = Standard article. Always available within one week. All prices are charged with German VAT(19%) if the client resides within the EC and has no valid VAT-ID number.
You need bigger quantities?  Ask for an individual offer.